show system radius servers status

This command displays the status of the RADIUS severs.

Syntax

show system radius servers status

Command Mode

Basic and Privileged User

Example

show system radius servers status
servers 0
ip-address 10.4.4.203
auth-port 1812
auth-ha-state "ACTIVE"
acc-port 1813
acc-ha-state "ACTIVE"
servers 1
ip-address 10.4.4.202
auth-port 1812
auth-ha-state "STANDBY"
acc-port 1813
acc-ha-state "STANDBY"

This example shows the following fields per server:

■

If the authentication port is 0, the server is not part of the redundancy server selection for authentication.

■

If the accounting port is 0, the server is not part of the redundancy server selection for accounting.

■

Server authentication redundancy (HA) status. ACTIVE = the server was used for the last sent authentication request.

■

Server accounting redundancy (HA) status. ACTIVE = the server was used for the last sent accounting request.